View 2SB942A_460988.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Power Transistors
2SB0942 (2SB942), 2SB0942A (2SB942A)
Silicon PNP epitaxial planar type
For low-frequency power amplification Complementary to 2SD1267, 2SD1267A Features
16.70.3 0.70.1
Unit: mm
10.00.2 5.50.2
4.20.2
4.20.2 2.70.2
* High forward current transfer ratio hFE which has satisfactory linearity * Large collector-emitter saturation voltage VCE(sat) * Full-pack package which can be installed to the heat sink with one screw
7.50.2
3.10.1
Absolute Maximum Ratings TC = 25C
Parameter Collector-base voltage (Emitter open) 2SB0942 2SB0942A VCEO VEBO IC ICP PC Ta = 25C Tj Tstg Symbol VCBO Rating -60 -80 -60 -80 -5 -4 -8 40 2 150 -55 to +150 C C V A A W
123
Unit V
Solder Dip (4.0) 14.00.5
1.40.1
1.30.2 0.5+0.2 -0.1
0.80.1
Collector-emitter voltage 2SB0942 (Base open) 2SB0942A Emitter-base voltage (Collector open) Collector current Peak collector current Collector power dissipation Junction temperature Storage temperature
V
2.540.3 5.080.5
1: Base 2: Collector 3: Emitter EIAJ: SC-67 TO-220F-A1 Package
Electrical Characteristics TC = 25C 3C
Parameter Collector-emitter voltage (Base open) Base-emitter voltage Collector-emitter cutoff current (E-B short) 2SB0942 2SB0942A ICEO IEBO hFE1 * hFE2 Collector-emitter saturation voltage Transition frequency Turn-on time Storage time Fall time VCE(sat) fT ton tstg tf 2SB0942 2SB0942A VBE ICES VCE = -4 V, IC = -3 A VCE = -60 V, VBE = 0 VCE = -80 V, VBE = 0 VCE = -30 V, IB = 0 VEB = -5 V, IC = 0 VCE = -4 V, IC = -1 A VCE = -4 V, IC = -3 A IC = -4 A, IB = - 0.4 A VCE = -10 V, IC = - 0.1 A, f = 10 MHz IC = -4 A, IB1 = - 0.4 A, IB2 = 0.4 A VCC = -50 V 30 0.2 0.5 0.2 40 15 -1.5 V MHz s s s Symbol VCEO Conditions IC = -30 mA, IB = 0 Min -60 -80 -2 -400 -400 -700 -1 250 A mA V A Typ Max Unit V
Collector-emitter cutoff current (Base open) Emitter-base cutoff current (Collector open) Forward current transfer ratio
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors. 2. *: Rank classification Rank hFE1 R 40 to 90 Q 70 to 150 P 120 to 250
Note) The part numbers in the parenthesis show conventional part number.
Publication date: February 2003 SJD00022BED
1
2SB0942, 2SB0942A
PC Ta
50
IC VCE
-6
IB=-120mA TC=25C
IC VBE
-10
VCE=-4V
Collector power dissipation PC (W)
40
Collector current IC (A)
-4
30 (1) 20
-60mA
Collector current IC (A)
(1)TC=Ta (2)With a 100x100x2mm Al heat sink (3)With a 50x50x2mm Al heat sink (4)Without heat sink (PC=2W)
-5
-100mA -80mA
-8
-6
25C TC=100C -25C
-3
-40mA -20mA -10mA
-4
-2
10 (3) (4) 0 0 40
(2)
-1
-8mA -5mA
-2
80
120
160
0
0
-2
-4
-6
-8
-10
-12
0
0
- 0.4
- 0.8
-1.2
-1.6
-2.0
Ambient temperature Ta (C)
Collector-emitter voltage VCE (V)
Base-emitter voltage VBE (V)
VCE(sat) IC
Collector-emitter saturation voltage VCE(sat) (V)
-100
IC/IB=10
hFE IC
104
VCE=-4V
fT I C
104
VCE=-5V f=10MHz TC=25C
Forward current transfer ratio hFE
-10
103
25C TC=100C
Transition frequency fT (MHz)
-1 -10
103
-1
25C TC=100C -25C
102
-25C
102
- 0.1
10
10
- 0.01 - 0.01
- 0.1
-1
-10
1 - 0.01
- 0.1
1 - 0.01
- 0.1
-1
-10
Collector current IC (A)
Collector current IC (A)
Collector current IC (A)
Safe operation area
-100
Non repetitive pulse TC=25C
Rth t
103 (1)Without heat sink (2)With a 100x100x2mm Al heat sink (1)
Thermal resistance Rth (C/W)
102
Collector current IC (A)
-10 ICP
IC t=1ms t=10ms DC
10
(2)
-1
1
- 0.1
2SB0942A 2SB0942
10-1
- 0.01 -1
-10
-100
-1 000
10-2 10-4
10-3
10-2
10-1
1
10
102
103
104
Collector-emitter voltage VCE (V)
Time t (s)
2
SJD00022BED
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.
2002 JUL

▲Up To Search▲

Price & Availability of 2SB942A

	To Download 2SB942A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .